180° 3-in-1 Brake Pipe Bender for 6mm, 8mm and 10mm Tube

Form smooth, controlled bends in compatible 6 mm, 8 mm and 10 mm tubing with this manual three-groove pipe bender. The long handles and shaped former support bends up to 180 degrees while helping reduce flattening and kinking when the correct tube is used.

Key selling points

• Three tube-size grooves in one tool
• Compatible nominal sizes: 6 mm, 8 mm and 10 mm
• Forms bends through angles up to 180 degrees
• Shaped former supports the tube during bending
• Long handles provide controlled manual leverage
• Useful for brake, fuel and general workshop tube fabrication where compatible

Specifications

• Product type: manual three-in-one tube bender
• Tube sizes: 6 mm, 8 mm and 10 mm outside diameter
• Maximum bend angle: up to 180°
• Groove count: 3
• Construction: alloy steel
• Operating method: two-handle manual bending
• Quantity: 1 tool

Typical applications

Suitable for forming compatible soft copper and aluminium tubing, including selected automotive brake, fuel and workshop lines. Suitability depends on tube material, wall thickness, outside diameter and required minimum bend radius.

Package contents

• 1 × 180° three-groove tube bender

Use and safety notes

Select the groove matching the tube’s outside diameter, align the intended bend point with the tool mark and apply steady pressure through the handles. Do not use excessive force on hardened, oversized or incompatible tubing. For brake-line work, use approved automotive tubing and fittings, make flares with the correct tool, inspect every bend and joint, then pressure-test the completed system. Brake-system fabrication should be checked by a suitably qualified person before road use.