Holden Cruze Barina Trax 1.4T Purge Valve Solenoid 55573017

Aftermarket vapour canister purge valve solenoid for selected Australian Holden vehicles fitted with the 1.4L turbo petrol engine. The valve controls fuel vapour flow from the charcoal canister to the intake as part of the EVAP emissions system.

Cross-reference OE number: 55573017

Australian vehicle fitment

• Holden Cruze JH 1.4L turbo petrol, A14NET engine, approximately 2012-2016
• Holden Barina TM RS 1.4L turbo petrol, A14NET engine, approximately MY2014-2018
• Holden Trax TJ 1.4L turbo petrol variants, subject to VIN and part-number confirmation

Australian build dates and equipment can vary. Before ordering, match 55573017, the electrical connector, both vapour ports and the hose orientation with the part removed from the vehicle. If uncertain, provide the VIN, registration, engine code and build date for a fitment check.

Not suitable for

• Holden Cruze 1.8L non-turbo petrol
• Holden Cruze 1.6L turbo petrol
• Holden Cruze 2.0L diesel
• Any vehicle using a different connector, port layout or cross-reference number

Important diagnostic and installation information

A purge valve is only one possible cause of EVAP fault codes, rough idle, hard starting after refuelling or fuel-vapour odour. Diagnose the fault before replacing parts. Installation should be completed by a suitably qualified automotive technician.

Work with the engine switched off in a well-ventilated area and keep sparks, flames and smoking materials away from fuel vapours. Inspect the vapour hoses and connectors for damage, confirm all clips are fully engaged, then clear and recheck diagnostic codes and test the EVAP system after installation.